Vanair 050817 - Air Tool Air Consumption Chart

APPENDIX A: ADDITIONAL INFORMATION AIR N ARC 200
®
ALL-IN-ONE POWER SYSTEM
®
PAGE - 150 090019-OP_r0
A.4 AIR TOOL AIR CONSUMPTION CHART
TOOL AIR REQUIRED CFM @ 90 PSI
Dual Action (DA) Sanders 28.8 - 43.2 SCFM
5" High Speed Sanders 28.8 - 43.2 SCFM
Jitterbug Sanders 28.8 SCFM
Straight Line Sanders 28.8 SCFM
Air Belt Sanders 28.8 - 43.2 SCFM
Gasket Scrapers 43.2 SCFM
Air Punch and Flange Tool 28.8 SCFM
3/8" Drill 28.8 SCFM
1/2" Drill 28.8 SCFM
Screw Driver 18 SCFM
Impact Screw Driver 28.8 SCFM
Speed Saw 36 - 43.2 SCFM
Body Saw 57.6 SCFM
Jig Saw 43.2 SCFM
16 Gauge Nibbler 28.8 SCFM
Cut off Tool 28.8 SCFM
150 mm Air Hammer 28.8 SCFM
190 mm Air Hammer 30.24 SCFM
High Speed Grinder 57.6 SCFM
Mini Air Grinder 21.6 SCFM
Mini Angle Head Grinder 21.6 SCFM
1/4" Angle Head Grinder 57.6 SCFM
Tire Buffer 28.8 SCFM
1/4" Ratchet Wrench 21.6 SCFM
3/8" Ratchet Wrench 28.8 SCFM
3/8" Butterfly Impact Wrench 21.6 SCFM
1/2" Impact Wrench 28.8 SCFM
1/2" Heavy Duty Impact Wrench 39.60 SCFM
3/4" Impact Wrench 54 SCFM
3/4" Impact Wrench with 6" anvil 54 SCFM
30 Ib Pavement Breaker 37 SCFM
Continued on next page