Vanair 050817 - SECTION 9: ILLUSTRATED PARTS LIST; Parts Ordering Procedure

AIR N ARC
®
200 SERIES ALL-IN-ONE POWER SYSTEM
®
SECTION 9: ILLUSTRATED PARTS LIST
090019-OP_r0 PAGE - 115
9.1 PARTS ORDERING PROCEDURE
Part orders should be placed through the distributor
from whom the unit was purchased. If, for any reason
parts cannot be obtained in this manner, contact the
factory directly at the address or phone numbers
below.
When ordering parts, always indicate the Serial
Number of the machine package. This can be
obtained from the Bill of Lading for the machine pack-
age, or from the compressor unit serial number plate.
See Figure 9-1 for location of machine package
serial plate. Consult Table 9A: Recommended
Spare Parts List on the next page for a listing of
replacement parts.
VANAIR
®
MANUFACTURING, INC.
10896 West 300 N.
Michigan City, IN 46360
Telephone: (800) 526-8817
(219) 879-5100
Service Fax: (219) 879-5335
Parts Fax: (219) 879-5340
Sales Fax: (219) 879-5800
www.vanair.com
Figure 9-1: Machine Package Serial Number Plate Location
800-526-8817
PSIG
260940
MODEL NUMBER
SERIAL NUMBER
MAXIMUM PRESSURE
COMPRESSOR INPUT RPM
www.vanai r.com
SECTION 9:
ILLUSTRATED PARTS LIST