VAT 653 Series - Page 56

INSTALLATION Series
65
56/129 Edition 2019-05-03 963283EA
4.10.2.4 Pressure ramp configuration
Time Mode (Ramp Mode = Time) Slope Mode (Ramp Mode = Slope)
The time within
Target Pressure Used
(ramp) reaches a
new Target Pressure is defined in parameter value
Ramp Time. Ramp Time is a value in the unit [seconds].
After setting a new
T
arget Pressure,
Target Pressure
Used will converge the Target Pressure in the slope
defines in parameter Ramp Slope. Ramp Slope is a
value in the unit [pressure / seconds]
5
7
9
11
13
15
17
19
21
0 5 10 15
pressure
time
Target Pressure
Target Pressure Used (ramp)
5
7
9
11
13
15
17
19
21
0 5 10 15
pressure
time
Target Pressure
Target Pressure Used (ramp)