Vatech Green X - Page 55

4. Installing the X-ray Unit: Base Stand Type
Green X / X18 (Model: PHT-75CHS) Installation Manual 47
English
4. Fix the CEPH unit to the main unit with M8X20 wrench bolts and washers.
When tightening the bolt, place a spirit level on the CEPH unit.
Required
Tool
Allen Wrench 6 mm / 0.24”
Allen Wrench 8 mm / 0.31”
Parts and
Accessory
Wrench Bolt
M8 x 20 - 4 pcs
(Part No. 25)
C E Washer
4 pcs
(Part No. 25)