Need help?Do you have a question about the Vatech PaX-i3D Smart and is the answer not in the manual?
General| Radiation Dose | Low dose |
|---|---|
| Sensor Type | Flat Panel Detector |
| Focal Spot | 0.5 mm |
| X-ray Tube Voltage | 50-99 kVp |
| Type | CBCT |
| Imaging Technology | Cone Beam Computed Tomography |
| Software | Ez3D-i |
| Tube Current | 4-10 mA |
| X-ray Tube Current | 4-10 mA |
| Power Requirements | AC 220-240V |
| Field of View | 5x5, 8x8, 12x9, 16x10 cm |
| Scan Volume Sizes | 5x5, 8x8, 12x9, 16x10 cm |
| Voxel Size | 0.08mm - 0.30mm (adjustable) |
To Next Page
