Vatech PaX-i3D Smart Installation Manual

Pax-i3D Smart(PHT-30LFO) Installation Manual
94
8 Installing Software
If the PC system is supplied with the equipment, the software is already
installed. Disregard this section.
8.1
Before Beginning
Ensure that the emergency stop switch is in OFF position prior to starting
installShield installation.
The image viewer program such as EasyDent or the one from the 3rd party
should be installed in advance of the InstallShield installation. For the
information on their installation procedures, refer to their respective manuals.
Before InstallShield installation, ensure that the video card driver installed
on PC is the most up-to-date version. To check this, go to the Website: www.
nvidia.com
Perform virus scan for the PC and InstallShield program with the anti-virus
program prior to proceeding with its installation.
Do not install the programs irrelevant to image acquisition and view together
with imaging program on the same PC. There may be subtle conicts between
them.

Vatech PaX-i3D Smart Specifications

General

Brand	Vatech
Model	PaX-i3D Smart
Category	Dental equipment
Language	English