Vatech PaX-i3D Smart Installation Manual

Pax-i3D Smart(PHT-30LFO) Installation Manual
84
7 Setting up PC’s Environment Variables
If the PC system is supplied with the equipment, the PC’s Environment
Variables are already set on the PC. Disregard this section
7.1
Before Beginning
The PC system supplied with the equipment is intended to be used as
an image acquisition only. For the purpose of the PC server for image
management, use of a different PC is strongly recommended.
The programs related to acquisition, viewing and manipulation of images
should be installed on the formatted PC, where no other program(s) except
the operating system (OS) is present.
Do not install the programs irrelevant to image acquisition and view on
the same PC. There may be subtle conflicts between them, leading to the
malfunction.
Ensure that the emergency stop switch is in OFF position prior to starting
with the installShield installation
Before InstallShield installation, ensure that the video card driver installed
on PC is the most up-to-date version. To check this, go to the website of the
graphic card manufacturer.
7.2
Checking PC BIOS Settings
1.
The PC is shipped, with its BIOS settings, as specified in the Appendix
E: Checking PC BIOS
Settings.
Before proceeding to the next sections, check the BIOS status.

Vatech PaX-i3D Smart Specifications

General

Brand	Vatech
Model	PaX-i3D Smart
Category	Dental equipment
Language	English