Vatech PaX-i3D Smart

Pax-i3D Smart(PHT-30LFO) Installation Manual
112
8 Installing Software
Initiating the Imaging Program
1.
First, click the patient information in the patient list, and click the
Dental CT
icon ( ) in the upper
left corner of the EasyDent’s main window to open the imaging program.
The error code E033, indicating that the equipment is still in the packing
mode, should disappear when the command to exit the packing mode is
executed. See the section 'Disabling the packing mode' to disable packing
mode.
2.
Proceed to the section
8.5.3 Conguring the parameters
.