6
I
PaX-i3D Smart
2. Warnings and Precautions
Be sure to strictly observe all warnings and safety instructions included
in this manual.
2.1
General Safety Precautions
❚
Operator qualifications
This equipment may only be operated by personnel fully trained in its operation.
● To operate this equipment, all operators must:
— have read and understood the user’s manual
— be familiar with the fundamental structure and functions of this equipment
— be able to recognize irregularities in the operation of this equipment and implement
appropriate measures to remedy such irregularities.
❚
General safety precautions
● Follow the instructions specified in this manual to ensure the safety of both the
patient and the operator.
● The operator must maintain visual contact with the patient at all times during
imaging.
● Do not open or remove the cover panels on this equipment. Always have a trained
and authorized service technician carry out inspection and maintenance of this
equipment.
● Do not place foreign objects on this equipment at any time.
● Do not place any objects within this equipment’s field of operation.
● Do not push or pull the equipment. If equipment overbalances, resulting in the risk of
physical injuries or property damage.
● Operators must ask the patient to remain still until the equipment arm has stopped
moving and the reset motion is complete.
To Next Page
Loading...
Need help?
General
