6. Acquiring PANO images
77
I
PaX-i3D Smart
English
6.3
X-ray Exposure
After the aligning the laser beam, the x-ray scan can begin.
The user must comply with the laws of the country regarding the usage of the
medical equipment.
Direct the patient to close their eyes during operation.
To acquire optimized images, direct the patient to hold their breath and to not
swallow. Also, direct them to not move.
1. Direct the patient to close their eyes.
2. Close the door when leaving the x-ray room. Observe the patient during operation
and check the imaging status.
3. Begin acquisition by pressing the exposure switch. Continue to press the exposure
switch until the image has been acquired.
Orange: X-ray On
4. Release the exposure switch when “Image capturing is completed” message
appears on the screen.
To Next Page
Loading...
Need help?
General
