PaX-i3D Green (PHT-60CFO) User Manual
19
2 Warnings and Precautions
Emergency stop
■
If a problem occurs during image acquisition, press the red emergency
stop button to immediately stop all moving parts and cut off all power to the
equipment.
Trouble-free operation
■
Never use this equipment in an environment that is susceptible to explosion.
■
Always operate the equipment within a temperature range of 10 °C to 35 °C
(50
℉
to 95
℉
) for the safe operation. Image quality may deteriorate if the
equipment is operated outside of this range.
■
Always allow the equipment sufcient time to warm up (while switched on) if
it has been exposed to temperatures of below 10 °C (50
℉
).
■
Only perform X-rays of patients if system is in full working order.
■
Always ensure that equipment movement is not obstructed by the patient’s
clothing, medical device (such as a wheelchair), or the patient themselves.
■
Do not leave the patient unattended around the equipment.
■
Remove all radio-controlled devices, mobile phones, etc. from the X-ray
room prior to image acquisition as these objects may cause the equipment
to malfunction.
Modifying the equipment
■
Modifying the equipment in any way which may affect the safety of the
operator, patient or other persons is prohibited by law.
■
No part of this equipment is serviceable by the user. All maintenance
and repair of this equipment must be performed by a qualified service
technician.
■
This product may only be operated with original VATECH accessories or
third-party accessories expressly approved by VATECH.
[PI3DG_130U_44A_en]User Guide.indd 19 2016-05-24 오후 4:18:23
To Next Page
Loading...
Need help?
General
