PaX-i3D Green (PHT-60CFO) User Manual
23
2 Warnings and Precautions
Lasers
■
The system incorporates Class 1 laser products. The light localizers used
in this product are intended for correct patient positioning and must not be
used for any other purpose.
■
For maximum safety, advise the patient not to look directly at the laser
beam.
■
While adjusting the patient, ensure that the laser beam is not directed at the
patient’s eyes.
Risk of eye injury!
Do not use this equipment with any other laser sources
and do not make any changes to the settings or processes
that are described in these operating instructions.
Cleaning
■
Never expose this equipment to liquids, mists or sprays. Exposing this
equipment to liquids may cause an electrical shock or otherwise damage
the system.
■
Do not use spray cleaners on this equipment, as this could cause a re.
During Operation
■
Never use this equipment in an environment that is susceptible to explosion.
■
Do not place ammable materials near this equipment.
■
Do not operate the PC or Touch screen while the equipment is performing
an operation. Failure to comply with this instruction may result in system
malfunction.
■
Immediately stop imaging if the equipment malfunctions in any way.
■
If a problem occurs during imaging, press the red emergency stop button to
immediately stop all moving parts and cut off all power to the equipment’s
electrical components.
■
Never touch the patient while also touching the SIP/SOP connectors.
[PI3DG_130U_44A_en]User Guide.indd 23 2016-05-24 오후 4:18:24
To Next Page
Loading...
Need help?
General
