Verathon BladderScan i10 User Manual

24
0900‑5005 REV‑00
3. If a battery is already in the console, remove it by pulling the strap.
4. Slide a charged battery into the battery well, and then push gently until the battery is completely seated.
Note: The battery is designed to prevent incorrect installation. If the battery does not slide into the
battery well easily, remove the battery, reorient it, and try again. Do not attempt to force the battery into
position.
5. Close and latch the battery well door.

Verathon BladderScan i10 Specifications

General

Brand	Verathon
Model	BladderScan i10
Category	Medical Equipment
Language	English