Verathon BladderScan i10 - Page 87

79
Operations & Maintenance Manual: Product Specifications
0900‑5005 REV‑00
BATTERY SPECIFICATIONS
The system includes a lithium‑ion battery. A battery symbol on the touchscreen display is always present,
indicating how much power remains and when the battery needs to be recharged or changed. If you have
purchased additional batteries and the optional battery charger, you can change the battery whenever
necessary.
Adhere to the following recommendations and guidance:
• Use only the console itself or the optional Verathon battery charger. Any other battery charger may
damage the batteries.
• Use only the battery model described in this section.
• Consider replacement of the battery if the time between battery charges is significantly reduced and
is affecting your use of the BladderScan i10 system. Contact Verathon Customer Care or your local
representative to order replacement batteries.
Table 23. Battery (0400‑0155)
CONDITION DESCRIPTION
General Specifications
Battery type Lithium Ion (Li‑Ion)
Height 23mm (0.89in)
Width 151mm (5.94in)
Depth 59mm (2.32in)
Weight 326g (0.72 lbs)
Electrical Specifications
Battery life
A fully charged battery will typically provide more than 24hours of normal
operating use between charges
Charging time 2.5 hours (typical)
Rated capacity 6.4 Ah, 70 Wh
Nominal voltage 10.8 V
Max charging voltage 12.6 V