VERITAS NetBackup 5240 Hardware Installation Guide

To connect three storage shelves to an appliance
1
Connect a SAS-3 cable to the left RAID port in the appliance.
2
Be sure that the blue clip on the connector in the appliance port points down.
3
Connect the other end of this cable to port A in the top I/O module of the storage
shelf.
4
Be sure that the blue clip on the connector in port A points down.
Adding one or more storage shelves to an operating 4TB appliance that does not have any storage shelves
Connecting three storage shelves to an appliance
102

VERITAS NetBackup 5240 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	5 year(s)