Adding the disk space of
additional storage shelves
This appendix includes the following topics:
■ Adding the disk space of additional storage shelves from the NetBackup
Appliance Web Console
■ Adding the disk space of additional storage shelves from the NetBackup
Appliance Shell Menu
Adding the disk space of additional storage
shelves from the NetBackup Appliance Web
Console
The following procedure describes how to add new storage shelf disk space to a
NetBackup appliance using the NetBackup Appliance Web Console.
To add new storage shelf disk space to a NetBackup appliance using the
NetBackup Appliance Web Console
1
Launch the NetBackup Appliance Web Console and verify that the new storage
devices appear on the Monitor > Hardware page. If the new storage devices
do not appear, check the cable connections and make sure that the power is
on.
2
Click Manage > Storage.
3
Select the Disks tab.
4
Click the Click here to scan for new disks option.
5
In the Do you want to scan for new disk? dialog box, click OK to start the
scan.
C
Appendix
To Next Page
Loading...
Need help?
General
