VERITAS NetBackup 5240 Hardware Installation Guide

Each SAS-3 cable is 1 meter (3.28 feet) long. The 1-meter cable is long enough to
connect an appliance to the fourth storage shelf when the recommended
configuration is used. A 3 meter (9.84 feet) SAS-3 cable is available separately in
case your rack arrangement requires more length. Contact Veritas Technical
Support, if needed.
Prerequisites for IPMI configuration
Verify the following configuration prerequisites:
■ The remote management port can auto-negotiate its link speed of up to 1 Gbps.
Note: If the IPMI is connected to a managed switch port, it is recommended
that you configure the switch port to auto-negotiation.
■ If a firewall exists between the appliance and the remote devices that manage
an appliance (like a laptop computer), open the following ports:
SSH22
HTTP80
SNMP162
HTTPS443
KVM623
RMM ISO/CD5120
RMM floppy5123
CD5124
SSL5127
KVM CLI5900
RMM CLI7578
SSL7582
Note: If you have a private internal network, remember to configure the settings
accordingly in your network address translation (NAT).
Preinstallation requirements
Prerequisites for IPMI configuration
20

VERITAS NetBackup 5240 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	5 year(s)