VERITAS NetBackup 5240 Hardware Installation Guide

7
Connect a SAS-3 connector to port A in the bottom of the I/O module in the
fourth shelf.
8
Be sure that the blue clip on the connector in this port points up.
9
Connect the other end of the cable to the right port in the appliance External
RAID PCIe card.
10
Be sure that the blue clip on the connector in this port points down.
Adding one or more storage shelves to an operating 4TB appliance that does not have any storage shelves
Connecting four storage shelves to an appliance
110

VERITAS NetBackup 5240 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	5 year(s)