VERITAS NetBackup 5240 Hardware Installation Guide

To connect a 4TB appliance to one storage shelf
1
Connect one end of the SAS-3 cable to the left-hand port in the External RAID
PCIe card on the appliance.
Note: Cables in the following diagrams are shown in different colors for
demonstration purposes only. The actual cables are black.
2
Connect the other end of the cable to port A in the top canister of the storage
shelf.
Installation procedures
Connecting a 4TB appliance to one storage shelf
38

VERITAS NetBackup 5240 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	5 year(s)