VERITAS NetBackup 5240 Hardware Installation Guide

Before you use the Remote Management interface, the following prerequisites must
be met:
■ The Remote Management interface must first be configured using the NetBackup
Appliance Shell Menu.
■ At least one power cable must be connected to a functioning power source.
■ At least one user must be enabled to use the LAN channel(s).
To access and use the IPMI web interface from a remote computer
1
Log on to a remote computer in the network and open a supported Windows
browser.
2
Enter the remote management port IP address that is assigned to the remote
management port. The following page appears:
3
Enter your login information. The default user name is sysadmin. The default
password is P@ssw0rd, where 0 is the number zero.
Click Login.
63Installation procedures
Accessing and using the Veritas Remote Management interface

VERITAS NetBackup 5240 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	5 year(s)