VERITAS NetBackup 5240 Hardware Installation Guide

5
Attach another SAS-3 cable between port A on the bottom I/O module and the
right port on the appliance RAID card.
6
Be sure that the blue clip on the connector in the bottom I/O module in storage
shelf port A points up.
7
Be sure that the blue clip on the connector in the appliance points down.
Next, connect network and power cables. Turn on the storage shelves and the
appliance per the required sequence. Verify that all units are functioning correctly.
97Adding one or more storage shelves to an operating 4TB appliance that does not have any storage shelves
Connecting one storage shelf to an appliance

VERITAS NetBackup 5240 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	5 year(s)