Vertiv | Liebert® CRV4 | User Manual 100
System Operation and Maintenance
No. Description No. Description
1 Rear 3 Water tray drain
2 Water tray drainage lter 4 Water tray drain lter
Figure 8-8 Water Tray Drainage Filter
Following are the procedures to replace the condensate pump:
1. Cut o the power supply of the unit.
2. Open the rear door, unscrew the hose clamp and pull out the water drain pipe.
3. Unscrew the hose clamp of the xed water pump.
4. Reverse the above steps (1 to 3) and replace the pump, refer the Figure 8-9 for better understanding.
No. Description No. Description
1 Location of water leak detector 3 Drain pipes on the ground
2 Location of water leak detector
Figure 8-9 Replace the Condensate Pump