Vertiv | SmartAisle2 | User Manual 15
Installation
The components and parts need to be shipped to the vicinity of the installation site. Owing to the heavy weight,
use machines like a pallet jack or an electric forklift.
Figure 2-2 Forklift and hand pallet
While handling and unloading the equipment and cabinets, the center of gravity of the fork is to be taken into
consideration to prevent dumping or equipment damage.
Figure 2-3 Cross direction schematic view
While moving the components, the obliquity should be maintained at an angle of 80° to 100°.
To Next Page
Loading...
