Safety Precautions & Measures
In this section, the safety measures related to the entire SmartAisle2 unit will be explained in detail.
• Read the manual prior to installation and operation of the unit. Only qualified personnel should move, install,
or service this equipment.
• The user reads and takes into account all the precautions, compliance, and safety measures before working
on the equipment. The unit control must be used exclusively for the purpose which it is intended for; the
manufacturer takes no liability for incorrect use or a modification to the unit control.
• Please read this manual carefully before installing, maintaining and troubleshooting; especially the
Warning/Danger/Caution information in the User Guide. Apart from the User Guide, also pay attention to
the warning labels on the unit and its components.
This manual is retained for the entire service life of the machine. The user must read all the precautions,
danger, warnings, and cautionary measures mentioned in the manual prior to carrying out any operations on
the machine.
Adhere to all the notes, warnings, cautions, potential dangers, and precautions
mentioned in the manual. Read this manual before carrying out any operation on
the unit.
The Warnings/Danger/Cautions/Precautions/Notes do not represent the
entire safety points to be observed and are only supplementary in nature. This
product is tailored for industrial, commercial, or other professional units (such
as manufacturing, electrical, and instrumentation setups) and not meant for
purposes related wholly to individuals without the credentials. The purpose of
the design is well defined and therefore, the manufacturers do not assume any
responsibility for any incorrect usage. Strict adherence to the norms and usage
should be observed. In case of any improper use or modifications, the warranty
will be void; handle with care, especially the key to the product must be allocated
to the service personnel responsible for maintenance.
To Next Page
Loading...
Need help?
General
