EasyManuals Logo

Vertiv Liebert SmartAisle2 User Manual

Vertiv Liebert SmartAisle2
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
General Safety Instructions
Use the tools with an insulation handle.
Wear rubber gloves and safety shoes.
Avoid placing tools and metal objects on the battery surface.
Remove the watches, rings, or any metal objects.
Ensure the power is disconnected before operating any internal components of the product.
Before operating the internal components for any type of maintenance activity, the mains breaker and all UPS
power must be switched o.
After an alarm triggers through product monitoring platform, it is required to timely find the cause and
troubleshoot the issue, to avoid more damage.
Risk of Electric Shock
There is a risk of electric shock which may lead to personnel injury or death. To prevent or avoid such situations,
the following precautions should be followed:
Disconnect the control box and remote power supplies prior to working on the product.
Local codes, regulations, and protocols may vary from region to region. Therefore, adhere to all these local
protocols and rules prior to installing, operating, or servicing the machine.
Read all the instructions, ensure that all the parts and components are included, and check the nameplate
to ascertain that the voltage matches the available mains; proceed with the installation, maintenance,
troubleshooting, and operating on the machine only after going through the preceding steps.
Before connecting the input power (including the AC mains and battery), ensure that the grounding is reliable.
Remember that the leakage current to earth is larger than 3.5 mA and lower than 5% of the input current.
This product is suitable only for the TT and TN type power grid; it doesn’t apply to the IT type power grid.
Finally, read all the labels on the unit and its components before operating any of these components
during installation and maintenance. The warnings and cautionary measures mentioned in this manual are
supplementary and therefore, the measures listed on the labels of the components and the unit must be
considered strictly before any operation.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vertiv Liebert SmartAisle2 and is the answer not in the manual?

Vertiv Liebert SmartAisle2 Specifications

General IconGeneral
BrandVertiv
ModelLiebert SmartAisle2
CategoryControl Unit
LanguageEnglish

Related product manuals