Vespa LX 50 Workshop Manual

Footrest
- Operate on the 3 screws shown in the figure once
the glove-box and fairing have been removed.
Air filter
- Remove the helmet compartment.
- after removing the side fairing, remove the 2
screws fixing the filter box to the engine, indicated
in the figure.
- Remove the two clamps indicated in the figure
Chassis Vespa LX 50
CHAS - 116

Vespa LX 50 Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	49.9 cc
Fuel System	Carburetor
Front Brake	200 mm disc
Rear Brake	110 mm drum
Seat Height	785 mm
Fuel Tank Capacity	8.6 liters
Tires Front	110/70 - 11"
Tires Rear	120/70 - 10"
Length	1, 770 mm
Width	705 mm
Cooling System	Air cooled
Transmission	Automatic
Max Power	3.2 kW
Max Torque	4.2 Nm