ViewSonic VSD231 - Setting Up Your VSD231 Smart Display: Power Operations; Connecting the Power Cord; Powering On the Device

Set Up Your VSD231 Smart Display
5
4
Connect the Power Cord
1
Connect the included power cord to
the power jack.
2
Connect the other end of the power cord to a suitable power outlet.
2.3 Power on Your Device
Touch the power button gently to power on your device
Slide the lock icon to unlock the screen
(if the lock screen function with slide is enabled)
1
After connecting the power cord, you can touch the power button about
0.5 seconds to power on your device.
2
Once powered-up, the LED indicator will show solid Blue.
3
The unlock display will appear after a short boot-up period. (If the lock
screen function is enabled).
4
Touch and slide the lock icon to unlock the screen if necessary.
5
The device is ready for use when the Home screen is displayed.