Document: LT0732 QE20 Fibre Networking User Manual
Issue 1.0 24 May 2023 Page 3-15
At the amp rack, SID 21, the Network and Remote SID setups are as follows – note
that to reach SID 20 for Speech and WIP the VoIP and WIP dial numbers for the
Fibre-Copper Bridge, SID 50, are used:
The configuration for the other amplifier rack, SID 22, is similar.
BGM and Paging Configuration.
The PIB at the MECP, SID 50, needs to have VoIP Proxy enabled on channels 3 and
4, with the URI mapped to lines 1 and 2 of the second ATA at the MECP, using a
G711u codec, so that BGM and paging audio can be streamed to the amp racks
SIDs 21 and 22.
To Next Page
Loading...
