~ 12 ~
NEEDLE THREADER
The needle threader allows you to thread the needle
automatically. The needle must be in the up position to
use the needle threader. We also recommend lowering the
presser foot.
1. Place the thread under the hook as illustrated.
2. Use the handle to pull the needle threader all the way
down. The threader hook swivels through the needle eye.
Place the thread under the thread hook.
3. Let the needle threader gently swing back. The hook
pulls the thread through the needle eye and forms a loop
behind the needle. Pull the thread loop out behind the
needle.
Note: For smooth threading, it is recommended that the machine is
set for straight stitch (in center needle position) when using the needle
threader.
Note: The needle threader is designed to be used for size 70-120
needles. You cannot use the needle threader for needles size 60
or smaller, the wing needle, twin needle, triple needle or when the
Buttonhole foot is attached. There are also some optional accessories
that require manual threading of the needle.
When threading the needle manually, make sure that the needle is
threaded from front to back.
2
1
3
To Next Page
Loading...
