~ 52 ~
43
4. Clean the feed dogs and hook area with the lint brush.
Put one drop of sewing machine oil on the hook race as
indicated by the arrows. (A, B)
5. Replace the bobbin case with the projection (3)
positioned against the spring (4). Replace the needle
plate.
OILING BEHIND THE
SEWING HEAD COVER
1. Remove two screws and face cover.
2. Put one drop of sewing machine oil to the points
indicated by arrows.
Screw
Sewing head cover
Helpful Hints : For the machine used frequently : It should be oiled
periodically. For the machine used after a long interval : It should be
oiled before it is used.
CAUTION: Always remove the dust and lint before oiling.
For best results always use high quality sewing machine oil. Use
of oil other than sewing machine oil will cause damage to your
machine.
BA
To Next Page
Loading...
