~ 4 ~
STITCH OVERVIEW
Toward rightToward left
¿Adjusting needle position for straight stitch 13 needle positions are available for quilting, top stitching etc.
Width control
Toward rightToward left
STITCH No. LENGTH (mm) NEEDLE POSITION TWIN
NEEDLE
Auto Manual Auto Manual
00
2.5 0.5 - 4.75
CENTER
LEFT - RIGHT
¿|
01
2.5 1.5 - 3.0
CENTER
LEFT - RIGHT
¿|
02
2.5 2.0 - 4.0
CENTER
-
|
STITCH No. LENGTH (mm) WIDTH (mm) TWIN
NEEDLE
STITCH No. LENGTH (mm) WIDTH (mm) TWIN
NEEDLE
Auto Manual Auto Manual Auto Manual Auto Manual
03
2.0 0 - 3.0 5.0 0 - 6.0
|
07
3.0
-
5.0 5.0, 6.0
±
04
2.0 1.0 - 3.0 3.0 2.0 - 7.0
|
08
2.5 1.5 - 3.0 5.5 3.5 - 7.0
|
05
1.5 0 - 2.5 6.0 2.5 - 6.0
|
09
0.5 0.25 - 1.5 7.0 3.5 - 7.0
|
06
2.0 1.0 - 3.0 3.0 1.0 - 6.0
|
10
0
-
3.0 2.0 - 4.5
±
On the following pages you will À nd information on the stitches included in your machine. Next to each stitch you can
À nd information about the stitch number and pre-set values (auto) for stitch width and length. Also provided are the levels
between which you can manually adjust the length and width of a stitch. Whether or not a twin needle can be used is
indicated in the table as well (
| = Yes, ± = No).
For details on how to adjust the stitch length and stitch width, see page 21.
To Next Page
Loading...
