~ 34 ~
5. Carefully mark the position of the buttonhole on your
garment.
6. Place the fabric under the foot. Pull out the bobbin
thread underneath the fabric to a length of about 4”
(10 cm).
7. Align the buttonhole mark on the fabric with the mark
on the buttonhole foot, and then lower the buttonhole
foot.
8. While holding the top thread, start the machine.
Sewing will be completed automatically in the following
order.
Fabric marking Mark
1 2 3
4 5 6 7
Buttonhole foot alignment position
1 2 3 4 5 6 7 8
Fabric marking
To Next Page
Loading...
