Vimar Eikon 20461 - Page 112

54 - ENGLISH
8.1.1
Power up the reader.
8.1.3
Place dip-switch 8 in the OFF position
for instantaneous opening of the contact,
or in the ON position for opening after a
50-second delay.
8.1.2
Select the “Electronic power switch”
address (see table on page 6).
8.1.5
When the LED turns green (after about 10
seconds), insert the smart card to be pro-
grammed as the MASTER.
8.1.6
When the LED turns off, the MASTER
smart card has been programmed.
8.1.4
Place dip-switch 2 in the ON position.
1
O
N
2 3 4 5 6 7
1 2 3 4 5 6 7 8
ON
0"
50"
6
7 8
6
7 8
yellow
MASTER
card
MASTER
card
MASTER
card
MASTER
card
1 2 3 4
6
7 8
ON
yellow
green
off