Event ID Description
ZInfo1 : Periphery address
ZInfo3 : 0: Periphery address is input, 1: Periphery address is output
0xE605 Too many productive connections configured
ZInfo1 : Slot of the interface
ZInfo2 : Number configured connections
ZInfo3 : Number of allowed connections
0xE610 Onboard PROFIBUS/MPI: Bus error fixed
ZInfo1 : Interface
ZInfo2 : Not relevant to the user
ZInfo3 : Not relevant to the user
PK : Not relevant to the user
DatID : Not relevant to the user
0xE701 Internal error - Please contact the hotline!
0xE703 Internal error - Please contact the hotline!
0xE710 Onboard PROFIBUS/MPI: Bus error occurred
ZInfo1 : Interface
ZInfo2 : Not relevant to the user
ZInfo3 : Not relevant to the user
PK : Not relevant to the user
DatID : Not relevant to the user
0xE720 Internal error - Please contact the hotline!
0xE721 Internal error - Please contact the hotline!
0xE722 Internal error - Please contact the hotline!
0xE723 Internal error - Please contact the hotline!
0xE780 Internal error - Please contact the hotline!
0xE801 CMD - Auto command: CMD_START recognized and successfully executed
0xE802 CMD - Auto command: CMD_End recognized and successfully executed
0xE803 CMD - Auto command: WAIT1SECOND recognized and successfully executed
0xE804 CMD - Auto command: WEBPAGE recognized and successfully executed
0xE805 CMD - Auto command: LOAD_PROJECT recognized and successfully executed
0xE806 CMD - Auto command: SAVE_PROJECT recognized and successfully executed
ZInfo3 : Status
0: Error
1: OK
0x8000: Wrong password
0xE807 CMD - Auto command: FACTORY_RESET recognized and successfully executed
0xE808 Internal error - Please contact the hotline!
0xE809 Internal error - Please contact the hotline!
VIPA System 300S Deployment CPU 314-6CF03
Diagnostic entries
HB140 | CPU | 314-6CF03 | GB | 16-43 101
To Next Page
Loading...