Display, Keys and Menus
Setup Menus
VT400 Technical Manual, Rev. A5 29 Doc # UM-VT400-EN
SETUP > SETUP 2 (Com 1 Settings)
Par Description Values
2.t Print type. Sets output of communication port 1
(printer port), or disables the port.
00=port disabled; 01=ticket; 02=weight
output; 03=demand; 13=alibi memory
2.C Print-on-demand character. 65-90
2.L Page length. Ticket length in linefeeds.
2.r Paper reverse. Number of reverse linefeeds
before printout.
2.A Left margin. Number of spaces from left margin.
2.F Page header. Number of linefeeds before
printout.
2.E Line termination. 0=LF 1=CRLF 2=LFCR
2.1 Printer model. 0= FANFOLD(like Epson FX or similar serial
printer) 1= SLIP (like Epson TM-295)
2.2 (Reserved for future use)
2.3 Print below minimum capacity. 0=NO 1=YES
2.4 (Reserved for future use)
2.5 (Reserved for future use)
2.6 Wait unload. 0=NO 1=YES
2.7 Printer error control. Set to 0 for
communication with a PC.
0=NO 1=YES
2.8 Operator print type change (Fn 20-30) 0=NO 1=YES
2.d Data bits serial channel 1. 17=7 data bits/even parity
08=8 data bits/no parity
Baud rate is 2400 by default.
To Next Page
Loading...
