Calibration
Locking and Unlocking Calibration
VT400 Technical Manual, Rev. A5 39 Doc # UM-VT400-EN
Figure 8 – Desktop model, sealing with lead seal / non-removable sticker
4.4.2 Securing Load Receptor
You can inscribe the serial number of the load receptor as part of the indicator
identification label.
The load receptor bears the serial number of the indicator on its data plate.
4.4.3 Checking Seal Status and Audit Trail Counter
In order to check whether the jumper is still in the sealed position, and that the audit
trail counter has not changed.
To check seal status and audit trail counter:
Execute function 48. If JP1 is currently in the sealed position, the word SEALED
appears on the display briefly. Following this, the audit trail counter is displayed.
Lead
seal
To Next Page
Loading...
