Vishay VT400 - Master-Slave Command Details (Tare & Keyboard); 1 Command: Upload Tare; 2 Command: Keyboard Emulation

Appendix B: Master-Slave Protocol
VT400 Technical Manual, Rev. A5 76 Doc # UM-VT400-EN
“ and (space) Commands: Download/Upload Parameters (1)
New settings do not go into effect until a Write to EEPROM (*) command is issued.
Data Byte
Number
Parameter
to be Set
Name Description
W1 4.P First two digits
of weighing
range
ASCII hex
W2 6.P Conversions
per second
ASCII hex
W3 Bit 8.1
Bit 8.2
Bit 8.3
Bit 8.4
Bit 8.5
Bit 8.6
Bit 8.7
Bit 8.8
b0
b1
b2
b3
b4
b5
b6
b7