Need help?Do you have a question about the Visionary Solutions Duet E-2 and is the answer not in the manual?
Explanation of PoE system, power per port, and switch capacity calculations for device power.
Details on Duet-2 bandwidth requirements and switch compatibility for optimal performance.
Essential switch functions like Jumbo Frames, IGMP Snooping, and IGMP Querier for network setup.
Step-by-step guidelines for configuring switches for multicast and IGMP snooping.
Step-by-step connection instructions for encoder and decoder configurations.
Setup for remote computer access and control using USB over IP functionality.
How Duet-2 endpoints are discovered on the network (DHCP, Auto IP Failover).
Steps to configure Windows computer network settings for DHCP or Auto IP communication.
Methods for discovering Duet-2 endpoints on the network using Vision Lite or DHCP server.
Recommended steps to configure static IP addresses for encoders and decoders for system consistency.
Manual configuration of stream settings for unicast and multicast modes.
Explanation of USB over IP functionality for remote computer control.
Enabling control of CEC-enabled displays via HDMI connection from the decoder.
Configuration for selecting audio sources (HDMI, Analog, Dante) for streams.
Selecting and prioritizing input sources for AV stream and HDMI OUT.
Capabilities for mass configuration and updates of decoders via CSV file.
Network configuration settings for the DuetE-2 encoder, including IP, VLAN, and PSE.
Configuration settings for the DuetE-2 encoder, including stream and audio options.
Network configuration settings for the DuetD-2 decoder, including IP, VLAN, and PSE.
Explanation of the IP address field and its modes for decoders.
Explanation of the IP netmask field for decoders.
Explanation of the IP gateway field for decoders.
Configuration settings for the DuetD-2 decoder, including stream host and audio.
Continued decoder configuration settings, including video format, HDCP, and splash screen.
Settings for configuring video wall mode, including name, stretch, rotation, and columns.
Overview of Vision Lite software for matrix switching, video wall control, and configuration.
Step-by-step instructions for installing the Vision Lite Server application.
Instructions to launch the Vision Lite User Interface via a web browser.
Procedure to reset Duet-2 units to factory default settings.
Steps to perform a factory default reset using the unit's web interface.
Steps to perform a factory default reset using the physical reset button.
Specifications for video codec, audio codec, bit rates, latency, protocols, and copy protection.
General| Brand | Visionary Solutions |
|---|---|
| Model | Duet E-2 |
| Category | Media Converter |
| Language | English |
To Next Page
