Visioneer Strobe XP 450 - System Requirements and Documentation; WHAT YOU NEED; DOCUMENTATION

WHAT YOU NEED 3
WHAT YOU NEED
An IBM-compatible Pentium PC, or AMD equivalent with:
■ A CD-ROM drive
■ An available Universal Serial Bus (USB) port
■ Microsoft
®
Windows
®
operating system: 2000 (Service Pack 4) or XP
(Service Pack 1 and 2)
■ A minimum of 512 MB (megabytes) of internal memory (RAM)
■ 200 MB minimum of free hard disk space
A VGA or SVGA Monitor
The recommended settings for your monitor are:
■ High Color (16-bit) or True Color (24-bit or 32-bit)
■ Resolution set to at least 800 x 600 pixels
To set your monitor’s colors and resolution:
■ Open the Windows Control Panel
■ Double-click on Display then select the Settings tab
DOCUMENTATION
Your scanner is delivered with the following documentation:
■ Quick Install Guide—Abbreviated installation instructions.
■ Visioneer Strobe XP 450 Scanner User’s Guide—On the Installation
CD; contains detailed installation, scanning, configuration, and
maintenance information.
■ PaperPort User’s Guide—On the Installation CD; contains detailed
feature and configuration information for the PaperPort software.
■ Online Help—For the scanner configuration, TWAIN and WIA
interfaces, and PaperPort software application.