EVENT REPORTING & CONTROL BY TELEPHONE AND SMS
42 D-307502 PowerMaster-10/30 G2 User's Guide
telephones numbers according to the options provided in the tables below:
PowerMaster-10 G2
No message will be reported
No message will be reported
All messages, except arming & disarming
All messages, except alerts
Arming and disarming (Open/close) only
Note: “
all
” means all events including the L. BAT and AC FAIL trouble messages (PowerMaster-30 G2 only).
The display shows the currently selected option (indicated by a
◼
symbol), for example, "
disable report
".
Using the or buttons you can now select the events you wish to be reported to SMS
numbers according to the options provided in the table below:
No message will be reported
All messages, except arming & disarming
All messages, except alerts
Arming and disarming (Open/close) only
The
◼
symbol now appears next to the new selected option.
a. The display shows the phone number or email currently programmed in this location (for example,
1032759641). The cursor blinks on the first digit of the code.
b. If the location is free the display will be blank ( - - - - ).
You can move the cursor to the next or previous location (digit) using the or button.
Within the private telephone menu, you can now repeat steps 7 – 9 to program or edit another phone
number.
Within the SMS menu, you can now repeat steps 8 - 10 to program or edit another SMS phone number.
Within the Email menu, you can now repeat steps 10 - 13 to program or edit another email.
To end this session and return to previous menu options, press the button.
You can select between: "
1 attempt
"; "
2 attempts
"; "
3 attempts
"; "
4 attempts
".
You can select between:
"
enable 2-way
" – enables 2-way voice communication with private telephones.
"
disable 2-way
" - disables 2-way voice communication with private telephones.
You can select between:
"
by single ack
" – an acknowledge signal from only a single telephone will stop the reporting process.
"
by all ack
" – an acknowledge signal from all telephones is required to stop the reporting process.
If the control panel is PowerMaster-10 G2 or PowerMaster-30 G2 without Voice option, the display reads
"
Redial attempts
".
The display shows the currently selected option (indicated by a
◼
symbol), for example, "
disable report
".
Using the or buttons you can now select the events you wish to be reported to emails or
SMS by server according to the options provided in the table below:
To Next Page
Loading...
Need help?
General