How to Use this Manual
This symbol is used to warn you of actions that are dangerous for the operator.
Read the associated warnings and instructions carefully.
Important: the identification plate should never be removed.
The data on the plate should not be modified.
This symbol is used for important Notes & Tips
Symbols Used in the Manual
Identification Data
Thank you for buying the Volta FBW Welding Kit. If you have any questions about the use of this
tool please contact our Technical Service Department at email: sales@voltabelting.com or visit our
website www.voltabelting.com.
This manual has been designed to provide the operator with all the necessary information on how to use the above tool
correctly. Warnings in the manual should be carefully followed for your personal safety. Be sure you carefully read the
instructions in this manual before using the tool. This will ensure use in compliance with safety standards.
The identification plate is on the front of the clamp. You should include the model and serial number in all inquiries to
Volta Belting about this tool.
Example
FBW 301
S/No. PL. 067/09
VOLTA
3
www.voltabelting.com
To Next Page
Loading...
Need help?
General
