Vox Lil Looper User Manual

11
Panels
The recorded contents of a loop that is stopped will be
deleted if the pedal is pressed and held for 2 seconds
or more.
) p. 24 “Erasing a loop-recorded phrase”
2. EFFECT knob
This knob selects the eect type and sets the parameter.
Aer an eect type is set with the EFFECT buon¸ you
can select the eect and set the rst eect parameter
with this knob.
3. EFFECT button
This buon selects the eect type.
The eect type will be indicated by the color of the
buon when it lights up. If the buon does not light
up, the eect is turned o.
Hint: When the optional VOX VFS2 foot switch is
connected to the EXT.SW jack, it can be used to turn
an eect on and o or select an eect type.
4. LOOP LEVEL/VALUE knob
This knob adjusts the loop playback volume. Also, it can set
the eect parameter, volume level when starting an AUTO
REC recording, metronome volume or time signature.
To adjust the loop volume, simply turn the knob.
To set the eect parameter and metronome, press and
hold the buon that’s assigned to each parameter and
turn the knob.
5. PEAK LED
This LED will light-up when the signal being input
from the INPUT jack is too loud. If this LED lights up,
adjust your guitar’s volume until the LED no longer
light up.
6. AUTO REC button
This buon turns the Auto Recording Start function on.
) p. 20 “Initiating recording when you start playing
(Auto Recording Start)”
7. METRONOME button
This buon turns the metronome sound on/o. When
you press the buon, it will light-up, and you’ll hear
the metronome.
To adjust the metronome volume, hold down this
buon and turn the LOOP LEVEL/VALUE knob.
8. TAP button
This buon sets the metronome tempo. You can set the

Vox Lil Looper Specifications

General

Brand	Vox
Model	Lil Looper
Category	Music Pedal
Language	English