Vox Lil Looper User Manual

16
VOX Lil' Looper Owner's manual
If the PLAY status LED is lit-up green, a phrase has
been recorded in that loop, and the phrase is playing ;
press the Loop pedal twice to stop.
If a REC status LED lights up red, that loop is
currently recording.
Press the LOOP pedal once to enter the playback
mode, and press it twice to stop the loop.
If the REC status LED lights up red and the PLAY
status LED lights up green, the overdubbing
function is being performed.
Press the LOOP pedal two times to stop the loop.
) p. 25 “Loop status”
) p. 24 “Erasing a loop-recorded phrase”
2. SelecttheeectwiththeEFFECTbuonand
EFFECTknob.
Set the eect type with
the EFFECT buon. The
type will be indicated by
the color that the buon
lights up.
Red:Pedal eect
Green:Modulation/Delay eect
Orange: Simulation eect
Doesnotlightup: Eect is o
Select an eect with the EFFECT knob and set the
rst parameter.
The eect will be switched according to the position
of the knob.
Four eects are available for each eect type.
Pedal eect: COMP, CRUNCH, OVERDRIVE,
DISTORTION
Modulation/Delay eect: CHORUS, PHASER,
STUTTER, DELAY
Simulation eect: ACOUSTIC, BASS, RADIO,
PITCH
Also, as you turn the knob, the eect will change
while switching to the next eect.
) p. 26 “About the eects”

Vox Lil Looper Specifications

General

Brand	Vox
Model	Lil Looper
Category	Music Pedal
Language	English