Vox Lil Looper User Manual

17
Creating phrases
Note: When the optional VOX VFS2 foot switch is
connected to the EXT.SW jack, it can be used to turn
an eect on and o or to control the switching of
the eect type. () p. 29 “Controlling the Lil’ Looper
with a foot switch”)
PressandholdtheEFFECTbuonandturnthe
LOOPLEVEL/VALUEknobtosetthesecond
eectparameter.
) p. 26 “About the eects”
You can save the eect seing for each eect type.
() p. 28 “Saving an eect”)
3. PresstheLOOP1pedaltobeginrecording,and
thenplayyourinstrument.
The REC status LED for Loop 1 will light-up red,
and recording will begin.
Youcanalsoinitiaterecordingwhenyoustartplaying.
) p. 20 “Initiating recording when you start playing
(Auto Recording Start)”
Whenrecordingthemetronomesoundasaguide,
setthetempobypressingtheTAPbuonseveral
times.Ifyou’vesetthetempo,themetronome
willbesounded.
Ifyou’vesetthetempo,thelengthofthecreated
phrasewillbeaprecisemultipleofthetempo.
)
p. 18 “Using the metronome as a guide while you
record”
) p. 19 “Determining the recording length”
4. Whenyou’veplayedtothespotwhereyouwant
toloopthephrase,presstheLOOP1pedaltostop
recording.
Loop 1 will switch from recording to loop playback,
and the PLAY status LED will light up green.
Hint: If you press the LOOP2 pedal while recording,
Loop 1 will switch to playback and Loop 2 will start
recording.
Hint: You can adjust the volume of the playback
sound with the LOOP/VALUE knob.
5. PresstheLOOP1pedaltwicetostopplayback.
If the loop is stopped, the PLAY STATUS LED will
blink green and the head of the phrase will turn
red for an instant.
This completes recording for Loop 1.
The loop with the recorded phrase will be deleted
if the power is turned o.

Vox Lil Looper Specifications

General

Brand	Vox
Model	Lil Looper
Category	Music Pedal
Language	English