Safety
Signal Words Used in This Manual 3.1
13
[en-US] | 09/2022 | 5100061327 | RTLx-SC3 | Operator’s Manual
3 Safety
3.1 Signal Words Used in This Manual
This manual contains DANGER, WARNING, CAUTION, NOTICE, and
NOTE signal words which must be followed to reduce the possibility of per-
sonal injury, damage to the equipment, or improper service.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will re-
sult in death or serious injury.
► To avoid death or serious injury from this type of hazard, obey all safety
messages that follow this signal word.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
► To avoid possible death or serious injury from this type of hazard, obey
all safety messages that follow this signal word.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
► To avoid possible minor or moderate injury from this type of hazard,
obey all safety messages that follow this signal word.
NOTICE
NOTICE identifies a situation that causes damage if it is not observed.
► To avoid possible damage from this type of hazard, obey all safety mes-
sages that follow this signal word.
Note: A Note contains additional information important to a procedure.
3.2 Safety Guidelines for Operating the Machine
Operator and service training, knowledge, and qualifications
Before operating, maintaining, or servicing the machine:
• Familiarize yourself with the location and proper use of all controls and
safety devices.
• Know the rules for the jobsite.
• Contact Wacker Neuson for additional training if necessary.
3
To Next Page
Need help?
General
