Safety
3.3 Safety Guidelines for Maintenance
16
Operator’s Manual | RTLx-SC3 | 5100061327 | 09/2022 | [en-US]
• Ensure that the machine will not tip over, roll, slide, or fall when not being
operated.
• Store the machine properly when it is not being used. The machine
should be stored in a clean location out of the reach of children.
3.3 Safety Guidelines for Maintenance
Service training
Before servicing or maintaining the machine, see Safety Guidelines for Op-
erating the Machine on page 13 and follow all guidelines for operating the
machine.
Machine modifications
• Use only accessories/attachments that are approved by the manufac-
turer.
• Do not disable safety devices.
• Do not modify the machine without the express written approval of the
manufacturer.
Replacing parts and labels
• Replace worn or damaged components with spare parts designed and
approved by the manufacturer.
• Replace all missing and hard-to-read labels.
• When replacing electrical components, use components that are identi-
cal in rating and performance to the original components.
• When replacement parts are required for this machine, use only replace-
ment parts from the manufacturer or those parts equivalent to the origi-
nal in all types of specifications, such as physical dimensions, type,
strength, and material.
Cleaning the machine
• Keep the machine clean and free of debris such as leaves, paper, car-
tons, etc.
• Keep labels legible.
• Do not clean the machine while it is running. Rotating parts can cause
severe injury.
• Clean with soapy water only.
• Never use gasoline or other types of fuels or flammable solvents to clean
the machine. Fumes from fuels and solvents can become explosive.
To Next Page
Loading...
