WAGNER EPG S2 Translation Of The Original Operating Manual

15
EPG S2
OPERATING MANUAL
VERSION 09/2017 ORDER NUMBER DOC2317574
5 DESCRIPTION
5.1 FIELDS OF APPLICATION, CORRECT USE
The EPG S2 control unit is used to supply air and voltage to two WAGNER automatic or
manual powder spray guns, in Corona or Tribo versions.
The control unit has no controls; various operating statuses are simply displayed.
The module is operated with a superordinate controller (e.g. PLC) from which it receives
the necessary information.
The interface between the EPG S2 and master controller takes place by means of the CANopen.
Incorrect use!
Risk of injury and damage to the device.
Only connect original WAGNER spray guns to the EPG S2 control
unit.
WARNING

WAGNER EPG S2 Specifications

General

Brand	WAGNER
Model	EPG S2
Category	Industrial Equipment
Language	English