WAGNER EPG S2 Translation Of The Original Operating Manual

44
EPG S2
OPERATING MANUAL
VERSION 09/2017 ORDER NUMBER DOC2317574
The maintenance intervals should be adapted by the operator depending on the level of
use and if necessary the level of soiling.
If in doubt, we recommend contacting WAGNER's specialist personnel.
The valid health and safety speci cations and safety instructions provided in Chapter 4
must be adhered to for all maintenance work.
Maintenance work Time stamp
per shift weekly
Blow out gun and check for sintering x
Check gun settings x
Check gun discharge pressure x
Blow out powder hoses x
Check grounding x
Check compressed air quality x
Check gun voltage x
Check powder hoses for bends and sintering x
8.2.3 MAINTENANCE PROCEDURES
Incorrect maintenance!
Risk of injury and damage to the device.
If contact with powder products or cleaning agents causes skin
irritation, appropriate precautionary measures must be taken,
e.g., wearing protective clothing.
The footwear worn by operating sta must comply with
EN ISO 20344. The measured insulation resistance must not
exceed 100megohms.
The protective clothing, including gloves, must comply with
EN ISO 1149-5. The measured insulation resistance must not
exceed 100 megohms.
WARNING

WAGNER EPG S2 Specifications

General

Brand	WAGNER
Model	EPG S2
Category	Industrial Equipment
Language	English