49
EPG S2
OPERATING MANUAL
VERSION 09/2017 ORDER NUMBER DOC2317574
10 DISASSEMBLY AND DISPOSAL
10.1 DISASSEMBLY
Procedure:
1. Switch o the system.
2. Lock the compressed air supply and decompress system.
3. Release electrical cable on control unit.
4. Detach hose for compressed air supply on control unit.
5. Disconnect hoses for feed air, dosing air and atomizing air on the control unit.
6. Remove grounding cable on control unit.
7. Loosen retaining nuts and dismount control unit.
WARNING
Incorrect disassembly!
Risk of injury and damage to the device.
Before starting disassembly:
- Switch o the energy/compressed air supply.
- Ensure that all system components are grounded.
- Secure system against being switched back on without
authorization.
Observe the operating manuals for any work.
10.2 DISPOSAL
Do not dispose of used electrical equipment with household
refuse!
In accordance with European Directive 2012/19/EU on the disposal
of used electrical equipment and its implementation in national
law, this product may not be disposed of with the household refuse,
but must be recycled in an environmentally correct manner.
WAGNER or one of our dealers will take back your used WAGNER
waste electrical or electronic equipment and will dispose of it for
you in an environmentally friendly way. Please contact one of our
service points, one of our representatives or us directly to arrange this.
NOTICE
To Next Page
Loading...
Need help?
General
