WAGNER EPG S2 Translation Of The Original Operating Manual

43
EPG S2
OPERATING MANUAL
VERSION 09/2017 ORDER NUMBER DOC2317574
8.2 MAINTENANCE
Maintenance work should be undertaken regularly and carefully by quali ed and trained
sta . They should be informed of speci c hazards during their training.
The following hazards may arise during maintenance work:
– Health hazard from inhaling powder lacquer
– Use of unsuitable tools and aids
Once the maintenance work is complete, the device must be checked by a quali ed person
to ensure a reliable condition.
8.2.1 MAINTENANCE STAFF
8.2.2 SAFETY INSTRUCTIONS
Incorrect maintenance/repair!
Danger to life and equipment damage.
Repair or replacement of devices or parts of devices are only
allowed to be performed outside the hazard area by quali ed
personnel.
DANGER
Incorrect maintenance/repair!
Risk of injury and damage to the device.
Repairs and part replacement may only be carried out by
specially trained sta or a WAGNER service center.
Before all work on the device and in the event of work interruptions:
- Switch o the energy/compressed air supply.
- Relieve spray gun and device pressure.
- Secure the spray gun against actuation.
Observe the operating and service manual for all work.
DANGER

WAGNER EPG S2 Specifications

General

Brand	WAGNER
Model	EPG S2
Category	Industrial Equipment
Language	English